Products

This 1.5" TC butterfly valve can be used on Spike+ kettles. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions. The handle is a special 'shorty' style which keeps a compact design. This handle is made...

Spike's 1/2" stainless steel ball valve screws directly into our brew kettles, no need for an additional nipple to make the connection like competitors valves. This valve is dual sided with a male (which screws directly into your kettle) and a female end (which...

Spike's conicals come equipped with this 100% sanitary 2.0” TC butterfly valve. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions. The butterfly valve is the preferred valve for the cold side of brewing instead...

The Spike Conical is a unitank. This means it is designed to handle pressures up to 15psi. This capability allows you to add 15psi of pressure needed to carbonate your beer before transferring to your keg. This will reduce carbonation times from upwards of...

The casters screw directly into the bottom of your Conical, Flex, Tank legs or brew table for easy installation. Specs: 3" caster wheel Stainless steel stem (with thread lock) Locking brake + locking swivel Non-marking wheel *For conicals, we highly recommend a standard or...

Another cool accessory to compliment Spike's CF series conicals. Their closed pressure transfer kit (CPT kit) will allow you to rack your beer from your conical to keg without exposing it to oxygen. This will help you avoid off-flavors that can be caused by...

Some of us have to heat our conicals during the long Winter months and Spike has a solution. Each conical has its own sized heater and the wattage of each is carefully designed to match it. Spike also uses a built in thermostat which stops...

Spike's insulated conical jacket uses high quality, extra thick, yet flexible neoprene material to insulate your conical from the worst ambient conditions be it a hot garage or cold basement. Each custom designed, hand stitched (in the USA) jacket is custom tailored to fit...

Spike's gasket is a one piece design made from FDA approved EPDM. This design allows for an easy install and easy clean up. Simply push the gasket into the gasket groove on the lid.Specs: -Black in color -FDA approved EPDM

Spike has completely re-designed their stainless conical line from the ground up. These conical fermenters are some of the best on the market. Along with their new TC100 Temp Control System, you'll have everything you need for a most excellent Brew Day.   CF5 Features:...

Spike has completely re-designed their stainless conical line from the ground up. These conical fermenters are some of the best on the market. Along with their new TC100 Temp Control System, you'll have everything you need for a most excellent Brew Day.   CF5 Features:...

Spike has completely re-designed their stainless conical line from the ground up. These conical fermenters are some of the best on the market. Along with their new TC100 Temp Control System, you'll have everything you need for a most excellent Brew Day.   CF15...

Spike has completely re-designed their stainless conical line from the ground up. These conical fermenters are some of the best on the market. Along with their new TC100 Temp Control System, you'll have everything you need for a most excellent Brew Day.   CF30...

All pumps are not equal. Spike engineers tested over 15 pumps and found almost all small submersible pumps on the market are grossly overrated. This can greatly affect your temperature control as flow rate is directly proportional to cooling efficiency. To use: Simply plug our pump into our...

Spike knows some customers like to grow into their equipment. That is why they designed the FLEX to be upgraded. When you're ready to step into carbonating your beer in your FLEX, you can easily upgrade to the FLEX+ lid package. The main features are...

Some will have to heat their FLEX during the long winter months and Spike has the solution. The FLEX heater was carefully engineered to match the heating needs to maintain set temperatures even in the coldest winter garage. Spike uses a built in thermostat...

Spike's insulated FLEX jacket uses high quality, extra thick, yet flexible neoprene material to insulate your FLEX from the worst ambient conditions like a hot garage or cold basement. Each custom designed, hand stitched (in the USA) jacket is custom tailored to fit our...

Spike's TC-100 temp control system will manage both cooling and heating of your FLEX. The digital controller's temp probe inserts into the included thermowell that attaches to the secondary port of the FLEX. Also included is a specially fitted neoprene jacket which features reinforced port holes...

The standard Flex is a huge step up from a standard carboy. Made from 304 stainless steel so scratches and shattering glass will be a thing of the past. Not only does the Flex have a dedicated racking port and thermometer port but those...

We are excited to be a part of the Spike Retail Family and are thrilled to introduce the new Flex fermenters. The standard Flex is a huge step up from a standard carboy. Made from 304 stainless steel so scratches and shattering glass will...

Spike's specially designed CO2 gas manifold is designed to attach directly to the 1.5" TC port on your fermenter's lid. This manifold allows you to easily add pressure for transfers, stuck yeast dumps, purging oxygen, carbonating, etc. The manifold has 3 ports for a pressure...

Since most brewers who keg use ball lock connections for hooking up their CO2 tank Spike designed a ball lock fitting to easily add CO2 to your conical. Spike's gas post assembly has a standard ball lock gas post on one end with a 1/4"...

Our 1.5” TC gaskets use an ultra clear FDA Silicone. These will work with both our conicals and kettle applications. These gaskets are rated to withstand temperatures up to 450F and can be used with a direct fire burner application. Specs:  -1.5" TC -FDA...

Spike's 2” TC gaskets use an ultra clear FDA Silicone. These will work with both their conicals and kettle applications. These gaskets are rated to withstand temperatures up to 450F and can be used with a direct fire burner application.Specs: -2" TC -FDA Silicone...

Spike's 4” TC gaskets use an ultra clear FDA Silicone. These will work with both their conicals and kettle applications. These gaskets are rated to withstand temperatures up to 450F and can be used with a direct fire burner application.Specs: -4" TC -FDA Silicone...

These couplers are quick and easy to use. Set of two.

**Not for use with the CF30** The shorty leg extensions are 9” long (compared to 18”). They were specifically designed to be used with the 2” sight glass in the vertical arrangement. This was the major design criteria that Engineering noticed. The long leg...

Spike's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with Spike's full port valves which have a 5/8" flow diameter; no flow restriction. Spike's proprietary fittings uses quick connect technology. The quick connect fitting simply hand...

The Spike Tr-clamp center pickup is specially designed to work with their Spike Tri-clamp line of kettles. The dual 1.5" TC flange allows the pickup tube to attach to the kettle and have a valve or other 1.5" TC accessory attached to the outside....

The Spike Tr-clamp shorty pickup is specially designed to work with their Spike Tri-clamp line of kettles. The dual 1.5" TC flange allows the pickup tube to attach to the kettle and have a valve or other 1.5" TC accessory attached to the outside....