Temperature Control

This electric heating belt can help to maintain minimum fermenting temperatures in cold rooms or basements. Fits 5, 6, or 7.5 gallon plastic buckets; although the Brew Belt will also fit 3, 5, 6 and 6.5 gallon carboys, the manufacturer does not recommend using...

Add some insulation to your BrewZilla. This neoprene jacket will help keep the heat in for quicker and more vigorous boils. Use it to speed up heating; take it off to speed up chilling. Includes a neoprene sleeve for the recirculation arm to reduce...

1.5" Tri-Clamp Silicone Gasket is used between fittings for a high temperature seal. Handles a wide range of temperatures from -58°F to 400°F. Material: Silicone Dimensions: 1.5" Fitting

SS nut and silicone o-ring for heating element. A machined stainless steel nut, and high-temperature silcone o-ring kit to facilitate weldless installation of an electric heating element in just about any kettle, or vessel. Note: The weldless heating element kit does not include the...

Replacement silicone o-ring for heating element. Type O-Ring O-Ring Type Standard Cross Section Shape Round Width 3/16" Actual Width .210" Inside Diameter 1-1/4" Actual Inside Diameter 1.225" Outside Diameter 1-5/8" Actual Outside Diameter 1.645" Material Silicone Silicone Type Standard, FDA Compliant Durometer Hard Durometer...

Add Spike Brewing's HERMS coil to your Hot Liquor Tank Kettle to complete your HERMS setup.This is the same coil used in their Trio system. Recirculate your wort from the mash tun through this coil in the HLT to maintain precise mash temperatures. 25'...

Spike's insulated conical jacket uses high quality, extra thick, yet flexible neoprene material to insulate your conical from the worst ambient conditions be it a hot garage or cold basement. Each custom designed, hand stitched (in the USA) jacket is custom tailored to fit...

Some will have to heat their FLEX during the long winter months and Spike has the solution. The FLEX heater was carefully engineered to match the heating needs to maintain set temperatures even in the coldest winter garage. Spike uses a built in thermostat...

Spike's insulated FLEX jacket uses high quality, extra thick, yet flexible neoprene material to insulate your FLEX from the worst ambient conditions like a hot garage or cold basement. Each custom designed, hand stitched (in the USA) jacket is custom tailored to fit our...

Spike's TC-100 temp control system will manage both cooling and heating of your FLEX. The digital controller's temp probe inserts into the included thermowell that attaches to the secondary port of the FLEX. Also included is a specially fitted neoprene jacket which features reinforced port holes...

These couplers are quick and easy to use. Set of two.

Spike's TC100 temp control system will manage both cooling and heating of your Spike Conical. The digital controller's temp probe will feed into the included thermowell on their CF Series Conical. Also included is a specially fitted neoprene jacket which features reinforced port holes to reduce the chance...

These USA made temp control coils are specifically designed for the Spike CF series conicals and extend far enough into the conical to temp control both full and half batches. Used in conjunction with a temp controller this temp control coil will help manage...

These 90° quick connect fittings will make attaching insulated tubing to your temp coil a breeze.  Specs: -Connect your temp coil to your insulated tubing without tools -3/8" to 1/2" connections -90° design; prevents glycol lines from kinking -2 fittings included per purchase Detailed TC-100 product guide: Product Guide.pdf

Use this analog unit to control the temperature of a refrigerator, freezer, or air conditioner. Often referred to as a refrigerator thermostat. It enables you to ferment and store beer at correct temperatures when the ambient room temperature is too warm. Your electrical cooling...

The Inkbird dual stage temperature controller is an easy to use and economical controller that is perfect for home brewing. Control both heating and cooling, and set independent differentials for each to protect your heating and cooling devices. The Inkbird controller performs many of...

With the WiFi enabled Inkbird controller you can monitor your fermentation temperature from virtually anywhere with an internet connection. Adjust settings with your mobile device and receive push notifications from the free companion app, InkbirdSmart, available for both iOS and Android. The app also...

Floating thermometer. Multiple uses in brewing and winemaking. (15 to 110C), (-10 to 220F)

Peel and stick liquid crystal thermometer. Shows temperature range for ales and lagers.

Dial face with easy to read numbers. 12" long probe makes it easy to take temperature reading. Individually boxed, range 0°-220° F.

** Unique Made-For-Brewing Dial Face **BrewMometer™ Unique Dial-face The unique patent pending dialface guides the brewer through the brewing process, helping to improve quality and consistency. The hermetically sealed glass face ensures long life. Large 3" dia. dial with low parallax stepped face, fine...

Plug kit to seal the hole drilled for the Brewmometer.

Interactive updates and alerts BeerSmith™ recipe integration Recordable Results Pair up to 7 sensors with customizable name Dashboard sensor overview 120 hour battery life (about 20 batches) Range: 30 ft indoors, 100ft unobstructed Fahrenheit/Celsius setting Made in USA The mission of the BrewVision® is...

12", range 0°-220° F. -20°-110° C.

Make your Gen 4 BrewZilla even smarter by pairing it with the RAPT Bluetooth Thermometer Take mash temp readings from the top and bottom of your grain bed simultaneously Set a temperature differential between the readings to enable the BrewZilla RAPT controller to more accurately...

This 1/2” NPT Brew Thermometer is ready to screw directly into the kettle. This 2.5” stemmed thermometer can cover 40-220 degree ranges. The 3” glass dial will display all the information you need at a glance and while withstanding the high heat from the...

This adjustable face dial thermometer can be orientated 360 degrees so reading the thermometer is easier. This 1/2” NPT Brew Thermometer is ready to screw directly into the kettle. This 2.5” stemmed thermometer can cover 40-220 degree ranges. The 3” glass dial will display...

Spike's 1.5" TC thermometer will connect directly to the 1.5" port on your Flex. There is no need for a thermowell which allows for quicker more accurate temp readings.  **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares** Specs:...

Whenever wort gets too cold, you wind up with long lag times and increased opportunities for bacteria to infect your beer. Whenever it gets too hot, off-flavors can form. Blichmann Engineering lets you get it just right, with the ThruMometer™. It allows you to...

Translucent, food-grade tubing temperature rated to 500F. Odorless, tasteless, and inert Silicone tubing is FDA food-grade approved from -100F to 500F. Translucent natural color allows you to see the flow. The perfect tubing for building a personal brewery, especially for any time that the...