Spike Brewing

Built to transform steam into liquid during the boil, Spike's steam condenser lid will enable you to brew inside without worrying about moisture collecting on your walls and ceiling, which can cause mold issues. These lids are not only designed to fit Spike kettles, but will...

Speed up your Brew Day with the Spike counterflow wort chiller. The hot wort flows through the inner convoluted copper tubing, while cold water flows in the opposite direction through the stainless steel outer tubing. This unique design offers cooling speeds 4x quicker than...

Spike's false bottom is for use with their standard Spike kettle line that uses NPT fittings. Design Features: All stainless design; no Silicone gasket to make a seal Low profile design; extremely low dead space (.25gal) Excellent filtering due to the dual stage filter...

The Tank False Bottom is designed for use with our Tank line of bottom draining kettles.  Specs: All stainless design, no silicone gasket to make a seal For use in a 10 gallon Tank Low profile design, extremely low dead space (<.25gal) Best filtering...

The Spike+ false bottom is for use with their Spike+ line which uses TC fittings. For their standard Spike kettle line that uses NPT fittings please see HERE.  Design Features: All stainless design; no Silicone gasket to make a seal Low profile design; extremely low...

Heat your kettle with Spike Brewing's electric heating element. 240v/5500w (120v/1350W) 1.5" TC stainless element with gasket and clamp

Add Spike Brewing's HERMS coil to your Hot Liquor Tank Kettle to complete your HERMS setup.This is the same coil used in their Trio system. Recirculate your wort from the mash tun through this coil in the HLT to maintain precise mash temperatures. 25'...

Spike engineers have totally redesigned the 1.5" TC sight glass from the ground up. The Spike TC Sight Glass is made up of five parts, compared to the 26 parts in a standard sight glass. No tools are required to assemble and disassemble. The glass...

Spike's 1.5" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized barb (5/8" OD) is designed for 1/2" Silicone tubing). The larger size does two things: 1) It stretches the tubing over the barb creating a tight...

Spike engineers have totally redesigned the 2" TC sight glass from the ground up. The Spike TC Sight Glass is made up of five parts, compared to the 26 parts in a standard sight glass. No tools are required to assemble and disassemble. The glass...

Spike Brewing's All-In-One PRV (Pressure Relief Valve)   Spike listened to the market and created a unique piece of equipment that puts safety first without compromising on features or functionality. And when dealing with pressure, that's important.   Detailed User Guide: User Guide  ...

This USA made blow off cane is designed to attach to the 1.5" TC on the lid of Spike Brewing conicals. Options: Standard: For use as a standard blow off into sanitizer 1.5" TC End: Use for a blow off into sanitzer with a...

This 1.5" TC butterfly valve can be used on Spike+ kettles. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions. The handle is a special 'shorty' style which keeps a compact design. This handle is made...

Spike's 1/2" stainless steel ball valve screws directly into our brew kettles, no need for an additional nipple to make the connection like competitors valves. This valve is dual sided with a male (which screws directly into your kettle) and a female end (which...

Spike's conicals come equipped with this 100% sanitary 2.0” TC butterfly valve. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions. The butterfly valve is the preferred valve for the cold side of brewing instead...

The Spike Conical is a unitank. This means it is designed to handle pressures up to 15psi. This capability allows you to add 15psi of pressure needed to carbonate your beer before transferring to your keg. This will reduce carbonation times from upwards of...

The casters screw directly into the bottom of your Conical, Flex, Tank legs or brew table for easy installation. Specs: 3" caster wheel Stainless steel stem (with thread lock) Locking brake + locking swivel Non-marking wheel *For conicals, we highly recommend a standard or...

Another cool accessory to compliment Spike's CF series conicals. Their closed pressure transfer kit (CPT kit) will allow you to rack your beer from your conical to keg without exposing it to oxygen. This will help you avoid off-flavors that can be caused by...

Some of us have to heat our conicals during the long Winter months and Spike has a solution. Each conical has its own sized heater and the wattage of each is carefully designed to match it. Spike also uses a built in thermostat which stops...

Spike's insulated conical jacket uses high quality, extra thick, yet flexible neoprene material to insulate your conical from the worst ambient conditions be it a hot garage or cold basement. Each custom designed, hand stitched (in the USA) jacket is custom tailored to fit...

Spike's gasket is a one piece design made from FDA approved EPDM. This design allows for an easy install and easy clean up. Simply push the gasket into the gasket groove on the lid.Specs: -Black in color -FDA approved EPDM

Spike has completely re-designed their stainless conical line from the ground up. These conical fermenters are some of the best on the market. Along with their new TC100 Temp Control System, you'll have everything you need for a most excellent Brew Day.   CF5 Features:...

Spike has completely re-designed their stainless conical line from the ground up. These conical fermenters are some of the best on the market. Along with their new TC100 Temp Control System, you'll have everything you need for a most excellent Brew Day.   CF5 Features:...

Spike has completely re-designed their stainless conical line from the ground up. These conical fermenters are some of the best on the market. Along with their new TC100 Temp Control System, you'll have everything you need for a most excellent Brew Day.   CF15...

Spike has completely re-designed their stainless conical line from the ground up. These conical fermenters are some of the best on the market. Along with their new TC100 Temp Control System, you'll have everything you need for a most excellent Brew Day.   CF30...

All pumps are not equal. Spike engineers tested over 15 pumps and found almost all small submersible pumps on the market are grossly overrated. This can greatly affect your temperature control as flow rate is directly proportional to cooling efficiency. To use: Simply plug our pump into our...

Spike knows some customers like to grow into their equipment. That is why they designed the FLEX to be upgraded. When you're ready to step into carbonating your beer in your FLEX, you can easily upgrade to the FLEX+ lid package. The main features are...

Some will have to heat their FLEX during the long winter months and Spike has the solution. The FLEX heater was carefully engineered to match the heating needs to maintain set temperatures even in the coldest winter garage. Spike uses a built in thermostat...

Spike's insulated FLEX jacket uses high quality, extra thick, yet flexible neoprene material to insulate your FLEX from the worst ambient conditions like a hot garage or cold basement. Each custom designed, hand stitched (in the USA) jacket is custom tailored to fit our...

Spike's TC-100 temp control system will manage both cooling and heating of your FLEX. The digital controller's temp probe inserts into the included thermowell that attaches to the secondary port of the FLEX. Also included is a specially fitted neoprene jacket which features reinforced port holes...