Fermenters │ Brites │ Unitanks

The FerMonster is a great alternative to glass. With a wider 4” mouth, there is easier access for cleaning. Made of heavy P.E.T. plastic. Comes with an air-tight ONE PIECE lid with a hole that will take a #10 stopper. There are no ribs,...

Glass carboys are preferred by some brewers over plastic buckets for a variety of reasons. Glass carboys do not absorb odors. Easily sanitized. Cannot be scratched. Will last forever. (Unless you drop them) 6.5 and 6 gallons carboys make good primary fermenters for five...

Blow off kit for the Fermenator™ G4. This Kit includes:  2 - 1.5" Tri-Clamps 1 - 1" Tri-Clamp Barb 1 - 1" Tri-Clamp Elbow 2 - 1" Tri-Clamp Gasket

With bail handle.   Lid sold separately.

With bail handle. Printed with gallon markings.   Lid sold separately.

With bail handle.   Deluxe primary wine and beer fermenter with gallon markings in black.   Lid sold separately.

The Spike Conical is a unitank. This means it is designed to handle pressures up to 15psi. This capability allows you to add 15psi of pressure needed to carbonate your beer before transferring to your keg. This will reduce carbonation times from upwards of...

The casters screw directly into the bottom of your Conical, Flex, Tank legs or brew table for easy installation. Specs: 3" caster wheel Stainless steel stem (with thread lock) Locking brake + locking swivel Non-marking wheel *For conicals, we highly recommend a standard or...

Another cool accessory to compliment Spike's CF series conicals. Their closed pressure transfer kit (CPT kit) will allow you to rack your beer from your conical to keg without exposing it to oxygen. This will help you avoid off-flavors that can be caused by...

Some of us have to heat our conicals during the long Winter months and Spike has a solution. Each conical has its own sized heater and the wattage of each is carefully designed to match it. Spike also uses a built in thermostat which stops...

Spike's insulated conical jacket uses high quality, extra thick, yet flexible neoprene material to insulate your conical from the worst ambient conditions be it a hot garage or cold basement. Each custom designed, hand stitched (in the USA) jacket is custom tailored to fit...

Spike's gasket is a one piece design made from FDA approved EPDM. This design allows for an easy install and easy clean up. Simply push the gasket into the gasket groove on the lid.Specs: -Black in color -FDA approved EPDM

Spike has completely re-designed their stainless conical line from the ground up. These conical fermenters are some of the best on the market. Along with their new TC100 Temp Control System, you'll have everything you need for a most excellent Brew Day.   CF5 Features:...

Spike has completely re-designed their stainless conical line from the ground up. These conical fermenters are some of the best on the market. Along with their new TC100 Temp Control System, you'll have everything you need for a most excellent Brew Day.   CF5 Features:...

Spike has completely re-designed their stainless conical line from the ground up. These conical fermenters are some of the best on the market. Along with their new TC100 Temp Control System, you'll have everything you need for a most excellent Brew Day.   CF15...

Spike has completely re-designed their stainless conical line from the ground up. These conical fermenters are some of the best on the market. Along with their new TC100 Temp Control System, you'll have everything you need for a most excellent Brew Day.   CF30...

Spike knows some customers like to grow into their equipment. That is why they designed the FLEX to be upgraded. When you're ready to step into carbonating your beer in your FLEX, you can easily upgrade to the FLEX+ lid package. The main features are...

Some will have to heat their FLEX during the long winter months and Spike has the solution. The FLEX heater was carefully engineered to match the heating needs to maintain set temperatures even in the coldest winter garage. Spike uses a built in thermostat...

Spike's TC-100 temp control system will manage both cooling and heating of your FLEX. The digital controller's temp probe inserts into the included thermowell that attaches to the secondary port of the FLEX. Also included is a specially fitted neoprene jacket which features reinforced port holes...

The standard Flex is a huge step up from a standard carboy. Made from 304 stainless steel so scratches and shattering glass will be a thing of the past. Not only does the Flex have a dedicated racking port and thermometer port but those...

We are excited to be a part of the Spike Retail Family and are thrilled to introduce the new Flex fermenters. The standard Flex is a huge step up from a standard carboy. Made from 304 stainless steel so scratches and shattering glass will...

Spike's specially designed CO2 gas manifold is designed to attach directly to the 1.5" TC port on your fermenter's lid. This manifold allows you to easily add pressure for transfers, stuck yeast dumps, purging oxygen, carbonating, etc. The manifold has 3 ports for a pressure...

Since most brewers who keg use ball lock connections for hooking up their CO2 tank Spike designed a ball lock fitting to easily add CO2 to your conical. Spike's gas post assembly has a standard ball lock gas post on one end with a 1/4"...

Our 1.5” TC gaskets use an ultra clear FDA Silicone. These will work with both our conicals and kettle applications. These gaskets are rated to withstand temperatures up to 450F and can be used with a direct fire burner application. Specs:  -1.5" TC -FDA...

Spike's 2” TC gaskets use an ultra clear FDA Silicone. These will work with both their conicals and kettle applications. These gaskets are rated to withstand temperatures up to 450F and can be used with a direct fire burner application.Specs: -2" TC -FDA Silicone...

Spike's 4” TC gaskets use an ultra clear FDA Silicone. These will work with both their conicals and kettle applications. These gaskets are rated to withstand temperatures up to 450F and can be used with a direct fire burner application.Specs: -4" TC -FDA Silicone...

**Not for use with the CF30** The shorty leg extensions are 9” long (compared to 18”). They were specifically designed to be used with the 2” sight glass in the vertical arrangement. This was the major design criteria that Engineering noticed. The long leg...

When pressurizing your Spike Conical you'll always want to use a pressure relief valve (PRV). This will prevent the tank from being over pressurized and causing a potential failure to occur. Spike's PRV was developed with their OEM specifically to work with their new...

**A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares** Another cool product our engineers and in-house welders developed is our USA made racking arm. This racking arm provides 6" of total travel allowing you to draw clear...

Attach this racking arm to the racking port on your bottom drain Tank Boil Kettle or Solo to ensure only the highest quality wort makes it into the fermenter.   Specifically designed for the Spike Brewing Tank Bottom Drain Boil and Solo kettles, this...