Brewpot Conversion Parts

Blichmann industrial grade brewing gloves are standard issue in commercial breweries!  Reduce risk of burns and scalds Keeps harmful sanitizers, acids, and caustic chemicals from your skin Since they can be effectively sanitized, they are a great way to keep sanitized equipment sanitized! Elbow...

This 304 stainless steel valve has 1" / 1.5" TC flanges on both ends The bore is exactly 1-3/8". The valve can be locked into several positions at various degrees of "open". To unlock the handle to turn the valve, the trigger is squeezed.

This heavy duty multi-purpose all-stainless screen screws into the Kettle Valve to provide you with a heavy duty stainless steel screen for mashing and boiling.  Made from 304 stainless, 16 mesh size to prevent grain husks and whole hops from entering your valve. Great as...

Full port stainless steel ball valves with a two-piece body and a lock out handle. Each end of the valve has 1/2" female pipe threads, and is suitable for applications where the temperature will be between -20 to 450 degrees F, and the pressure...

Great for transferring flow between two destinations.  L port stainless steel ball valve with lock out handle. Each end of the valve has 1/2" female pipe threads, and is suitable for applications where the temperature will be between -20 to 450 degrees F, and...

The patent pending G2 Linear Flow valve is now in tri-clamp. Easily fine tune your flow rate for sparging, lautering and chilling, increasing the repeatability of your system. The built in 90 degree outlet can be oriented at any angle to make hose routing...

BoilerMaker™ G2 linear flow valve to retrofit into G1 kettles. Patent pending G2 linear flow valve allows you to easily fine tune your flow rate for sparging, lautering and chilling, increasing the repeatability of your system. The built in 90 degree outlet can be...

The patent pending G2 Linear Flow valve is now in tri-clamp. Easily fine tune your flow rate for sparging, lautering and chilling, increasing the repeatability of your system. The built in 90 degree outlet can be oriented at any angle to make hose routing...

Recirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool inlet comes with the Blichmann G2 Valve Does...

Recirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool inlet comes with the Blichmann 1.5" Sanitary Butterfly...

Recirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool port assembly installs high up on your kettle...

Brewers that use immersion chillers and also own a pump should know that recirculating the wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center...

Quick Disconnect - Elbow 1/2 in. Hose Barb, male QD.   Patented HFC12 series couplings have flow comparable to many 1/2" nominal flow couplings in a 3/8" body size. Compact and lightweight, HFC couplings replace bulky and heavy brass ball and sleeve couplings in...

Quick Disconnect - 1/2 in. Hose Barb, Male QD   Patented HFC12 series couplings have flow comparable to many 1/2" nominal flow couplings in a 3/8" body size. Compact and lightweight, HFC couplings replace bulky and heavy brass ball and sleeve couplings in a...

Quick Disconnect - 1/2 in. NPT, Female QD, Not Valved   Patented HFC12 series couplings have flow comparable to many 1/2" nominal flow couplings in a 3/8" body size. Compact and lightweight, HFC couplings replace bulky and heavy brass ball and sleeve couplings in...

Type A - Male QD/ Female 1/2" NPT. The most common use for this part is attaching to the wort in/out ports on a plate chiller. It can also be used for recirculation ports, the in/out of a HERMS coil. etc. Brewhardware's stainless steel...

Type B - Female QD Coupling to Male 1/2" NPT. These are usually installed on the more portable or "mobile" end. The type B can be coupled to a garden hose adapter to backflush plate chillers or to fill vessels with fresh brewing water....

Brewhadware's stainless steel Camlock style disconnects (sometimes called cam and groove) are a great compromise between cost and function for connections between vessels, chillers, pumps and hose sets. The "quick disconnect" portion of the camlock system consists of male and female parts. The male...

Type F - Male QD/ Male 1/2" NPT. The most common use for this part is attaching to the output of your vessel ball valves. Brewhardware's stainless steel Camlock style disconnects (sometimes called cam and groove) are a great compromise between cost and function...

This high flow elbow barb is used with the Type B camlock (purchased separately) This is great for the hose ends that connect to vessel bulkheads. When three or four feet of silicone gets filled with liquid, it tends to pull down and kink...

SS High-Flow Quick Disconnect - 1/2" Male Pipe Thread Female QD Used with the Stainless Steel Male Quick Disconnect these quick disconnects seal up very well in either flow direction, without a lot of work in connecting them. These feature a 1/2" Male National Pipe Thread...

SS High-Flow Quick Disconnect - 1/2" Female Pipe Thread male QD Used with the Stainless Steel Female Quick Disconnect these quick disconnects seal up very well in either flow direction, without a lot of work in connecting them. These feature a 1/2" Female National Pipe Thread...

SS High-Flow Quick Disconnect - 1/2" Male Pipe Thread male QD Used with the Stainless Steel Female Quick Disconnect these quick disconnects seal up very well in either flow direction, without a lot of work in connecting them. These feature a 1/2" Male National Pipe Thread...

This 1.5" TC butterfly valve can be used on Spike+ kettles. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions. The handle is a special 'shorty' style which keeps a compact design. This handle is made...

Spike's 1/2" stainless steel ball valve screws directly into our brew kettles, no need for an additional nipple to make the connection like competitors valves. This valve is dual sided with a male (which screws directly into your kettle) and a female end (which...

Spike's conicals come equipped with this 100% sanitary 2.0” TC butterfly valve. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions. The butterfly valve is the preferred valve for the cold side of brewing instead...

Spike's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with Spike's full port valves which have a 5/8" flow diameter; no flow restriction. Spike's proprietary fittings uses quick connect technology. The quick connect fitting simply hand...

Spike's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with Spike's full port valves which have a 5/8" flow diameter; no flow restriction. Spike's proprietary fittings uses quick connect technology. The quick connect fitting simply hand...

Spike's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with Spike's full port valves which have a 5/8" flow diameter; no flow restriction. Spike's proprietary fittings uses quick connect technology. The quick connect fitting simply hand...

The Spike Tr-clamp center pickup is specially designed to work with their Spike Tri-clamp line of kettles. The dual 1.5" TC flange allows the pickup tube to attach to the kettle and have a valve or other 1.5" TC accessory attached to the outside....