Products

Spike's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with Spike's full port valves which have a 5/8" flow diameter; no flow restriction. Spike's proprietary fittings uses quick connect technology. The quick connect fitting simply hand...

This pressure gauge can be used while pressure fermenting, briting or pressure transferring.  Specs: -0-30psi -2" Dial -1/4" npt  Examples of how to assemble a pressure gauge and PRV to the top 1.5" TC lid port shown to the right. You can also attach to...

When pressurizing your Spike Conical you'll always want to use a pressure relief valve (PRV). This will prevent the tank from being over pressurized and causing a potential failure to occur. Spike's PRV was developed with their OEM specifically to work with their new...

**A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares** Another cool product our engineers and in-house welders developed is our USA made racking arm. This racking arm provides 6" of total travel allowing you to draw clear...

Attach this racking arm to the racking port on your bottom drain Tank Boil Kettle or Solo to ensure only the highest quality wort makes it into the fermenter.   Specifically designed for the Spike Brewing Tank Bottom Drain Boil and Solo kettles, this...

Cap any 1.5” port with this stainless steel cap. Specs: -1.5" TC -304SS

Cap any 2” port with this stainless steel cap. Specs: -2" TC -304SS

Cap any 4” port with this stainless steel cap. Specs: -4" TC -304SS

A very cool add-on for Spike's conical line. Spike heard many brewers who have switched from clear carboys to stainless and they only have one complaint; They couldn't see their beer fermenting any more. Spike's engineers designed a clear polycarbonate (same material as bullet...

Spike's 2" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized barb (5/8" OD) is specially designed for 1/2" Silicone tubing. The larger size does two things: 1) It stretches the tubing over the barb creating a...

Spike's TC100 temp control system will manage both cooling and heating of your Spike Conical. The digital controller's temp probe will feed into the included thermowell on their CF Series Conical. Also included is a specially fitted neoprene jacket which features reinforced port holes to reduce the chance...

These USA made temp control coils are specifically designed for the Spike CF series conicals and extend far enough into the conical to temp control both full and half batches. Used in conjunction with a temp controller this temp control coil will help manage...

These 90° quick connect fittings will make attaching insulated tubing to your temp coil a breeze.  Specs: -Connect your temp coil to your insulated tubing without tools -3/8" to 1/2" connections -90° design; prevents glycol lines from kinking -2 fittings included per purchase Detailed TC-100 product guide: Product Guide.pdf

This whirlpool assembly includes a Spike 1/2" stainless steel ball valve, Side Pickup Tube, and Camlock F disconnect.  Specs: Spike 304 stainless steel NPT valve 1/2" NPT Side Pickup Tube Camlock F disconnect

This whirlpool assembly includes a Spike TC valve, Side Pickup Tube, and a pair of TC clamps and gaskets Specs: Spike 304 stainless steel TC valve TC Side Pickup Tube 2 1.5" TC Clamps 2 1.5" TC Gaskets

Makes a smooth and complex American style whiskey flavor with lingering woody notes. Top Shelf Spirits has been developed as a range of flavorings for your homemade distilled spirit, inspired by spirits all over the world. Each flavoring is beautifully presented in 50 ml (1.7 US...

Strong with peppery notes. Just add this to a neutral spirit or vodka for a taste experience inspired by a top shelf spirit. Top Shelf Spirits has been developed as a range of flavorings for your homemade distilled spirit, inspired by spirits all over the world....

Top Shelf Whiskey Flavoring Makes a complex Whiskey style flavoring with rich oak and subtle fruity tones. Top Shelf Spirits has been developed as a range of flavorings for your homemade distilled spirit, inspired by spirits all over the world. Each flavoring is beautifully presented in 50...

Material: Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability. Size: 1/4”Barb x 1/4”Barb x 1/4”BarbFitting connects to hose on all ends. Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose...

1/4" Splicer (Barb-Barb)

Material: Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability. Size: 3/8”Barb x 3/8”Barb x 3/8”Barb – 10mm Barb x 10mm Barb x 10mm Barb.Fitting connects to hose on all ends. Barbed fitting creates a tight seal on...

For stirrin | wort.

Boil proof rigid plastic for stirring wort, grains, wines.

Boil proof rigid plastic for stirring wort, grains, wines.

Boil proof rigid plastic for stirring wort, grains, wines.

Boil proof rigid plastic for stirring wort, grains, wines.

All stainless 20 quart stockpot. Stay cool handles. High dome vented lid. Durable non-porous surface will not chip, crack, peel or pit. Made by Progressive.

The Pot Still Alembic Condenser is best used with the T500 Boiler and the Pot Still Alembic Dome Top. You can use this with the T500 Boiler without the Pot Still Alembic Dome Top, to do this it fits on to the lid of...

The Still Spirits T500 Copper Condenser. There has always been a vigorous debate over whether copper or stainless steel is the best material for a still. Now with a redesigned outlet block, pre-packed with saddles, redesigned column nut, 2 different tap adapters, in a...

The Still Spirits Turbo 500 reflux condenser works on the principles of ceiling temperatures, where it prevents chemical substance above a certain boiling point being processed. Unlike other reflux condensers on the market, the Turbo 500 works with a focus on the water flow...