Brew Kettles │ BIAB │ False Bottoms

BoilerMaker™ G2 linear flow valve to retrofit into G1 kettles. Patent pending G2 linear flow valve allows you to easily fine tune your flow rate for sparging, lautering and chilling, increasing the repeatability of your system. The built in 90 degree outlet can be...

Recirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom.

Recirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool inlet comes with the Blichmann G2 Valve Does...

Recirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool inlet comes with the Blichmann 1.5" Sanitary Butterfly...

Recirculating wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center of the kettle bottom. This whirlpool port assembly installs high up on your kettle...

Brewers that use immersion chillers and also own a pump should know that recirculating the wort back into the kettle to whirlpool the wort makes for much faster cooling and will also make a concentrated pile of trub and hop particles in the center...

Spike engineers have totally redesigned the 1.5" TC sight glass from the ground up. The Spike TC Sight Glass is made up of five parts, compared to the 26 parts in a standard sight glass. No tools are required to assemble and disassemble. The glass...

Spike's 1.5" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized barb (5/8" OD) is designed for 1/2" Silicone tubing). The larger size does two things: 1) It stretches the tubing over the barb creating a tight...

Spike engineers have totally redesigned the 2" TC sight glass from the ground up. The Spike TC Sight Glass is made up of five parts, compared to the 26 parts in a standard sight glass. No tools are required to assemble and disassemble. The glass...

This 1.5" TC butterfly valve can be used on Spike+ kettles. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions. The handle is a special 'shorty' style which keeps a compact design. This handle is made...

Spike's 1/2" stainless steel ball valve screws directly into our brew kettles, no need for an additional nipple to make the connection like competitors valves. This valve is dual sided with a male (which screws directly into your kettle) and a female end (which...

Spike's conicals come equipped with this 100% sanitary 2.0” TC butterfly valve. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions. The butterfly valve is the preferred valve for the cold side of brewing instead...

The casters screw directly into the bottom of your Conical, Flex, Tank legs or brew table for easy installation. Specs: 3" caster wheel Stainless steel stem (with thread lock) Locking brake + locking swivel Non-marking wheel *For conicals, we highly recommend a standard or...

Another cool accessory to compliment Spike's CF series conicals. Their closed pressure transfer kit (CPT kit) will allow you to rack your beer from your conical to keg without exposing it to oxygen. This will help you avoid off-flavors that can be caused by...

Our 1.5” TC gaskets use an ultra clear FDA Silicone. These will work with both our conicals and kettle applications. These gaskets are rated to withstand temperatures up to 450F and can be used with a direct fire burner application. Specs:  -1.5" TC -FDA...

Spike's 2” TC gaskets use an ultra clear FDA Silicone. These will work with both their conicals and kettle applications. These gaskets are rated to withstand temperatures up to 450F and can be used with a direct fire burner application.Specs: -2" TC -FDA Silicone...

Spike's 4” TC gaskets use an ultra clear FDA Silicone. These will work with both their conicals and kettle applications. These gaskets are rated to withstand temperatures up to 450F and can be used with a direct fire burner application.Specs: -4" TC -FDA Silicone...

Spike's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with Spike's full port valves which have a 5/8" flow diameter; no flow restriction. Spike's proprietary fittings uses quick connect technology. The quick connect fitting simply hand...

The Spike Tr-clamp center pickup is specially designed to work with their Spike Tri-clamp line of kettles. The dual 1.5" TC flange allows the pickup tube to attach to the kettle and have a valve or other 1.5" TC accessory attached to the outside....

The Spike Tr-clamp shorty pickup is specially designed to work with their Spike Tri-clamp line of kettles. The dual 1.5" TC flange allows the pickup tube to attach to the kettle and have a valve or other 1.5" TC accessory attached to the outside....

Spike's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with Spike's full port valves which have a 5/8" flow diameter; no flow restriction. Spike's proprietary fittings uses quick connect technology. The quick connect fitting simply hand...

**A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares** Another cool product our engineers and in-house welders developed is our USA made racking arm. This racking arm provides 6" of total travel allowing you to draw clear...

Attach this racking arm to the racking port on your bottom drain Tank Boil Kettle or Solo to ensure only the highest quality wort makes it into the fermenter.   Specifically designed for the Spike Brewing Tank Bottom Drain Boil and Solo kettles, this...

Cap any 1.5” port with this stainless steel cap. Specs: -1.5" TC -304SS

Cap any 2” port with this stainless steel cap. Specs: -2" TC -304SS

Cap any 4” port with this stainless steel cap. Specs: -4" TC -304SS

A very cool add-on for Spike's conical line. Spike heard many brewers who have switched from clear carboys to stainless and they only have one complaint; They couldn't see their beer fermenting any more. Spike's engineers designed a clear polycarbonate (same material as bullet...

Spike's 2" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized barb (5/8" OD) is specially designed for 1/2" Silicone tubing. The larger size does two things: 1) It stretches the tubing over the barb creating a...

This whirlpool assembly includes a Spike 1/2" stainless steel ball valve, Side Pickup Tube, and Camlock F disconnect.  Specs: Spike 304 stainless steel NPT valve 1/2" NPT Side Pickup Tube Camlock F disconnect

This whirlpool assembly includes a Spike TC valve, Side Pickup Tube, and a pair of TC clamps and gaskets Specs: Spike 304 stainless steel TC valve TC Side Pickup Tube 2 1.5" TC Clamps 2 1.5" TC Gaskets